Network Management

Reply
New Contributor
Posts: 3
Registered: ‎01-24-2016

How to poll AP stats using SNMP on PRTG

Hey guys,

how do I monitor all the AP that is connected to the WLC ? It is currently unable to detect any AP's so we have no visbility.

 

I don't know which OID (Object identifier) will do this and how it can display as stats in PRTG.

Internet is saying table below as the OID but when i do a show snmp trap-list, it does not display in the list. The firmware is version 6.4 on the aruba WLC.

wlsxWlanAPTable1.3.6.1.4.1.14823.2.2.1.5.2.1.4

my PRTG has set to auto discover the aruba WLC on udp port 161 and i have set to send SNMP traps and responses to the PRTG server on udp port 161 and 162

Guru Elite
Posts: 19,997
Registered: ‎03-29-2007

Re: How to poll AP stats using SNMP on PRTG

Please see the thread here:  http://community.arubanetworks.com/t5/AirWave-and-Network-Management/Monitoring-Aruba-APs-with-cacti/m-p/1711/highlight/true#M47

 

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
New Contributor
Posts: 3
Registered: ‎01-24-2016

Re: How to poll AP stats using SNMP on PRTG

Hi cjoseph,

thank you for your advice.

By any chance you know what the OID is for wlsxWlanAPTable and wlsxWlanAPStatsTable ?

Did a quick search on this MIB and nothing returned http://community.arubanetworks.com/aruba/attachments/aruba/IAP/1529/1/Aruba%20Instant%206.2.0.0-3.2%20MIB%20Reference%20Guide.pdf

 

Basically i want to poll all the AP network utilization stats to our monitoring platform PRTG

 

 

Guru Elite
Posts: 19,997
Registered: ‎03-29-2007

Re: How to poll AP stats using SNMP on PRTG

Is this for controller-based or instant access points?
Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
New Contributor
Posts: 3
Registered: ‎01-24-2016

Re: How to poll AP stats using SNMP on PRTG

 


cjoseph wrote:
Is this for controller-based or instant access points?

All controller based for now.

New Contributor
Posts: 1
Registered: ‎05-04-2016

Re: How to poll AP stats using SNMP on PRTG

Has anyone managed to get Auba Monitoring of AP's working with PRTG. I have searched the internet and struggled to find any useful information.

Search Airheads
Showing results for 
Search instead for 
Did you mean: