Network Management

Reply
Contributor I

Mapping Cisco ACS to Airwave role

Hi,

 

I have two groups in Cisco ACS.

I would like to setup Airwave so that users in 1 of my ACS groups get the AMP Administrator role, and the other group gets the AP/Device Manager role.

 

How can I do this ?

 

Thanks

 

Lee

 

Guru Elite

Re: Mapping Cisco ACS to Airwave role

I found this https://arubanetworkskb.secure.force.com/pkb/articles/FAQ/Integrating-an-ACS-TACACS-server-to-Authenticate-AWMS-Users

 

While searching from here:  http://support.arubanetworks.com/KNOWLEDGEBASE/tabid/133/Default.aspx

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor I

Re: Mapping Cisco ACS to Airwave role

I notice that this article states "as of AMP release 7.0, ACS 5.0 is no longer supported".  Wondering if AMP 7.6 or 7.7 supports current ACSI 5.4.x?

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: