Network Management

New Contributor

NPS Configuration for Airwave Management Access

Hello all...  The only point I am lost on is the Vendor Specific Attributes.  Neither Aruba or HP are in the dropdown list, so I don't know what to choose, and I don't know the syntax for the Attributes to configure.  Any assistance offered would be greatly appreciated.

Re: NPS Configuration for Airwave Management Access

Please check to learn how you can add the Vendor Specific Attributes to NPS.


There is a table of the ID numbers that you need for each attribute as well; you only need to add the attributes that you will actually use.

If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).

Re: NPS Configuration for Airwave Management Access

You need to return the Aruba-Admin-Role.  In the example below I am returning read-only.




That is using PAP also.  I am seeing issues with PEAP-MSCHAPv2.  Hope that helps.

If my post is helpful please give kudos, or mark as solved if it answers your post.

Search Airheads
Showing results for 
Search instead for 
Did you mean: