Network Management

New Contributor

NPS Configuration for Airwave Management Access

Hello all...  The only point I am lost on is the Vendor Specific Attributes.  Neither Aruba or HP are in the dropdown list, so I don't know what to choose, and I don't know the syntax for the Attributes to configure.  Any assistance offered would be greatly appreciated.

Re: NPS Configuration for Airwave Management Access

Please check to learn how you can add the Vendor Specific Attributes to NPS.


There is a table of the ID numbers that you need for each attribute as well; you only need to add the attributes that you will actually use.

If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).

Re: NPS Configuration for Airwave Management Access

You need to return the Aruba-Admin-Role.  In the example below I am returning read-only.




That is using PAP also.  I am seeing issues with PEAP-MSCHAPv2.  Hope that helps.

If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Search Airheads
Showing results for 
Search instead for 
Did you mean: