The set up:
Unboxed the new 7210 and did basic configuration prior to making it a local controller - child of the 3600 it is intended to replace. It came up in airwave as expected.
Converted it to a master, rebooted, upgraded code from 6.3.1.10 to 6.4.2.4 and made some AP configuration and provisioning changes to prepare for the new AP205 and 275 mountain we're deploying.
Added the first 5 APs and all sems well on the controller and the 5 initial access points. Except airwave doesn't seem to have detected them.
The (probable) issue:
in the device monitoring page in airwave, I see the following under "recent AMP device events:
Time User Event
Mon Mar 16 12:37:17 2015 matthew.sabin Polling now
Mon Mar 16 12:26:28 2015 matthew.sabin Poll Now: no results after 10 minutes.
Sounds like an SNMP problem, so:
Quick comparison of SNMP settings on controllers
New:
snmp-server user "airwave" auth-prot sha 12345678 priv-prot des 12345678
mobility-manager 10.a.a.a user airwave 12345678 udp-port 162 rtls 8000
Old:
snmp-server user "airwave" auth-prot sha 12345678 priv-prot des 12345678
mobility-manager 10.a.a.a user airwave 12345678 udp-port 162 rtls 8000
Quick comparison of Airwave's credential sets
New:
Credentials for 091aw009:
Community String:
Telnet/SSH Username: solarwinds
Telnet/SSH Password: xxxxxxxxxx
"enable" Password: xxxxxxxxxx
SNMPv3 Username: airwave
Auth Password: 12345678
SNMPv3 Auth Protocol: sha
Privacy Password: 12345678
SNMPv3 Privacy Protocol: des
IP: 10.n.n.n
Old:
Credentials for 091boiid-wc1:
Community String:
Telnet/SSH Username: solarwinds
Telnet/SSH Password: xxxxxxxxxx
"enable" Password: xxxxxxxxxx
SNMPv3 Username: airwave
Auth Password: 12345678
SNMPv3 Auth Protocol: sha
Privacy Password: 12345678
SNMPv3 Privacy Protocol: des
IP: 10.o.o.o
I'm not seeing any difference, yet old works fine, and new does not. Is there a checkbox in the controller config I missed which tells it to allow SNMP?
I did find a thread with advice to test SNMP from Airwave to the controller, however that was for v2c and my attempts to duplicate it for v3 have been unsuccessful.
Any ideas?
#3600#7210