07-27-2016 04:49 AM
We are using Instant config mode within our airwave v22.214.171.124 and all looks good.
However, the PCI compliance report comes back with a fail due to Mismatches. There are none.
If we switch off Instant config The report passes successfully.
Are these 2 processes incompatible?
07-27-2016 06:02 AM
I would suggest upgrading to 126.96.36.199 for the latest fixes regarding IGC.
Consulting Systems Engineer - ACCX, ACDX, ACMX
If you found my post helpful, please give kudos
08-01-2016 04:18 PM
What version of code are you running on the iAP?
There is a lag between iAP code updates and Airwave updates - such that Airwave doesn't always parse iAP configurations as new features are added in iAP and aren't quite caught up in Airwave.
Possibly the two management modes aren't quite in sync either.
if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
08-03-2016 03:39 AM
I will try updating the airwave server and let you know how it goes.
The IAP firmware is 188.8.131.52-184.108.40.206 Does this need to be later also?
The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more visit the Mimecast website.