Network Management

Reply
New Contributor
Posts: 1
Registered: ‎02-08-2017

Password cant be reset through CLI on Airwave

[ Edited ]

Hi,

Can get to reset the admin user through the CLI on Airwave. It will accept the update but will not allow access through the GUI. 

Have changed the is_enabled to 0 and login_attempts to 0, but still no joy. 

Version - 8.2.3.1

Any tips on how to get around this?

Cheers

Aruba Employee
Posts: 92
Registered: ‎04-24-2013

Re: Password cant be reset through CLI on Airwave

[ Edited ]

Hi,

 

Please set is_enabled to 1 for enabling the user and try again. Output for a user would look like below,

 

[root@Aruba-Airwave mercury]# dbc "select * from users where username = 'admin';"
id | username | password | role_id | full_name | email | phone | notes | password_format | login_attempts | is_enabled
----+----------+----------------------------------+---------+-----------+-------+-------+-------+-----------------+----------------+------------
3 | admin | 2cf94b0aea63ebf7bf41c90fe500603e | 5 | | | | test | md5 | 0 | 1
(1 row)

Regards,
Vishnu
If my post helped you, don't forget to give kudos ;)
Search Airheads
Showing results for 
Search instead for 
Did you mean: