Network Management

Reply
Occasional Contributor I
Posts: 6
Registered: ‎04-08-2011

Pause / Kill Airwave Nightly Maintenance

Airwave v7.7.14.3

 

We are planning an early morning AOS upgrade at a time when Airwave nightly maintenance is normally still running.

 

Can someone please provide the CLI commands for cleanly pausing and killing nightly maintenance?

MVP
Posts: 1,399
Registered: ‎10-25-2011

Re: Pause / Kill Airwave Nightly Maintenance

cli into Airwave and type crontab -e and comment out the crontab with #
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Moderator
Posts: 321
Registered: ‎08-28-2009

Re: Pause / Kill Airwave Nightly Maintenance

this will work - but note that any access to the Amp Setup -> Network page of the Airwave will re-write the crontab entry back to it's original state.

regards

-jeff

 

 


pmonardo wrote:
cli into Airwave and type crontab -e and comment out the crontab with #

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: