Network Management

Reply
Frequent Contributor II
Posts: 106
Registered: ‎10-20-2011

Port priority on AP's

Hello,

 

I have a 7210 controller with AP-215 AP's with data tunneling back through the controller.  I set up firewall policies on the Aruba controller to set priorities on certain traffic.  What type of priority settings should I set up on the ports that the AP's are connecting to, or the uplinks, so that this traffic is being prioritized on the switch level all the way back to the controller?  Does this make sense?

 

 

Guru Elite
Posts: 20,808
Registered: ‎03-29-2007

Re: Port priority on AP's

You typically need priority or QOS on traffic that is congested.  The primary place there is congestion is typically the wireless, then the WAN.  The wired network is the last place you would typically have congestion.

 

What kind of traffic is it and does the client provide QOS or priority for it?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor II
Posts: 106
Registered: ‎10-20-2011

Re: Port priority on AP's

Hello,

 

It is voice traffic from Mitel phones connected to a WNCE3001.

 

 

Guru Elite
Posts: 20,808
Registered: ‎03-29-2007

Re: Port priority on AP's

Do you have a quick diagram of how everything is connected?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: