Network Management

Reply
New Contributor
Posts: 3
Registered: ‎04-04-2016

S1500 24P Switch

Hi, I am new to Aruba and to the Airheads community. I have a config file on note pad that I would like to copy to a new switch out of the box. I know this is simple process but would like someone to assist....line to line CLI not sure of the steps. Thanks!!

Guru Elite
Posts: 8,191
Registered: ‎09-08-2010

Re: S1500 24P Switch

I'm not sure what you're asking. If you have a prebuilt config, you can just paste it into the CLI.


Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
New Contributor
Posts: 3
Registered: ‎04-04-2016

Re: S1500 24P Switch

thank you for your reply. is there a command before paste? copy config? something like that? is there something that needs to be done first when the switch is first turned on?

Guru Elite
Posts: 8,191
Registered: ‎09-08-2010

Re: S1500 24P Switch

Just "config t" to get into global config mode.

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
New Contributor
Posts: 3
Registered: ‎04-04-2016

Re: S1500 24P Switch

Cappalli, I knew it was something simple. Thanks for you help!

Search Airheads
Showing results for 
Search instead for 
Did you mean: