Network Management

last person joined: 20 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

SNMP Model Information Query S1500-24P

This thread has been viewed 1 times

  • 1.  SNMP Model Information Query S1500-24P

    Posted Aug 03, 2016 03:28 PM

    Does anyone know the SNMP statement to query the model information of an S1500 switch?



  • 2.  RE: SNMP Model Information Query S1500-24P

    EMPLOYEE
    Posted Aug 03, 2016 04:10 PM
    It's the standard sysDescr OID.



    1.3.6.1.2.1.1.1.0





    8/3/2016 16:08:26 (3 ms) : SNMP V2c

    8/3/2016 16:08:26 (5 ms) : Custom OID .1.3.6.1.2.1.1.1.0

    8/3/2016 16:08:26 (214 ms) : -------

    8/3/2016 16:08:26 (215 ms) : Value: ArubaOS (MODEL: ArubaS3500-48P-US),
    Version 7.4.1.4 (54199)

    8/3/2016 16:08:26 (218 ms) : Done


  • 3.  RE: SNMP Model Information Query S1500-24P

    Posted Aug 03, 2016 04:23 PM

    Sorry, should have explained that I needed to run this remotely against a switch?



  • 4.  RE: SNMP Model Information Query S1500-24P

    EMPLOYEE
    Posted Aug 03, 2016 04:30 PM
    What NMS are you using?


  • 5.  RE: SNMP Model Information Query S1500-24P

    Posted Aug 03, 2016 04:33 PM

    Airwave for the most part



  • 6.  RE: SNMP Model Information Query S1500-24P

    EMPLOYEE
    Posted Aug 03, 2016 04:45 PM
    AirWave should pull in the device model automatically.



    I'm sorry, I'm not following what you're asking.


  • 7.  RE: SNMP Model Information Query S1500-24P

    Posted Aug 05, 2016 02:45 PM

    It appears Airwave does not automatically pull this information in so I was trying to see if there was a way to get absolute current data in some form or fasion. 



  • 8.  RE: SNMP Model Information Query S1500-24P

    EMPLOYEE
    Posted Aug 05, 2016 02:46 PM
    I would open a TAC case. It should be pulling the model in.