Network Management

Reply

Re: SNMP get failed error after upgrade from Airwave 8.2.4 to 8.2.5

   hi, any update with this case? the same is happening to me, there is no problem with the 2530F, but with the 5406Zl2 it does not bring information

 

Firmware Software revision  : KB.16.04.0009 

 

thank

Frequent Contributor I

Re: SNMP get failed error after upgrade from Airwave 8.2.4 to 8.2.5

Our local HPE Aruba SE was able to correct this problem by going into the configuration of the 5400-series switches and adding this:

 

snmp-server response-source dst-ip-of-request

 

 

Airwave then polled and the switches showed as 'up'. Why this configuration command is necessary now when it wasn't previously is unknown to me at this point, but it might be worth trying.

Contributor II

Re: SNMP get failed error after upgrade from Airwave 8.2.4 to 8.2.5

Thank you 

The string "snmp-server response-source dst-ip-of-request" solved my problem.

 

Re: SNMP get failed error after upgrade from Airwave 8.2.4 to 8.2.5

Thank you, the problem was solved

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: