Network Management

Reply
New Contributor
Posts: 1
Registered: ‎01-10-2017

Sending startup-config to tftp using snmset

Is it possible to save the startup-config to a tftp-server using a snmpset command?

Guru Elite
Posts: 21,543
Registered: ‎03-29-2007

Re: Sending startup-config to tftp using snmset

SNMp variables are read only, unfortunately.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: