03-02-2014 07:33 PM
I am sure I have missed in somewhere, but looks like our controller is on PST time, I need it on EST, where do I set that in the GUI?
I am currecntly running 7.7.9
Solved! Go to Solution.
03-02-2014 11:07 PM
Sr. Techical Marketing Engineer
03-02-2014 11:11 PM
In the group configuration that your controller is in, you can set the timezone.
If my post is helpful please give kudos, or mark as solved if it answers your post.
ACCP, ACMP, ACMX #294
03-04-2014 08:42 AM
The best way to do this is from the command line. Instead of re-running the entire install wizard, you can just run the portion that sets the time:
# cd /root/svn/mercury/install
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
11-04-2015 06:30 AM
Also, it is important to make sure that the hardware clock is synchronized with the system clock:
[root@airwave mercury]# date
Wed Nov 4 09:16:57 EST 2015
[root@airwave mercury]# hwclock
Wed 04 Nov 2015 09:17:01 AM EST -0.851653 seconds
[root@airwave mercury]# hwclock --systohc