Network Management

Reply
Regular Contributor I
Posts: 169
Registered: ‎10-22-2010

Setting up certificate authentication and run in to a issue.

[ Edited ]

I have set up the certificate authentication in Airwave.

12.png

On the client PC, from which i take the webUI access, I am getting this message.

13.PNG

Community Administrator
Posts: 2,180
Registered: ‎12-03-2013

Re: Setting up certificate authentication and run in to a issue.

Do you have the proper cert installed on the pc you are using to access GUI? @rgin any other ideas?

CWNA, ACMP, Security +
Moderator
Posts: 1,244
Registered: ‎10-16-2008

Re: Setting up certificate authentication and run in to a issue.

The authentication pass should be logged in /var/log/httpd/access_log, might also check that there's no errors in /var/log/httpd/error_log.

 

Beyond that, the cert input needs to have the root ca cert and then the ssl chain cert.  If you're only providing one, then the 2 factor fails.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Search Airheads
Showing results for 
Search instead for 
Did you mean: