Network Management

Reply
Occasional Contributor II

Simultaneous Telnet connections to my Aruba Controller

I get this message when I try to telnet into one of my controllers. "Sorry, maximum number of connections reached!" Unfortunately I may have caused this issue my self by changing the exec-timeout to 0. So I guess everytime I logged in and didn't log out, those sessions just accumulated until I reached the session limit. I guess the question that i'm asking is, can I bypass this some way without having to reboot the controller?

Guru Elite

Re: Simultaneous Telnet connections to my Aruba Controller

You need to connect to the console to log some sessions out.  You would do this by connecting to the console of the controller and then:

 

type "show loginsessions" to see who is logged in

 

Type "clear loginsession <session id>" to kick people off.

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor II

Re: Simultaneous Telnet connections to my Aruba Controller

Thank you.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: