Network Management

last person joined: yesterday 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Spectrum monitor radio profile

This thread has been viewed 4 times

  • 1.  Spectrum monitor radio profile

    Posted Mar 23, 2016 11:16 PM

    I was useing the ASE site to create my Spectrum monitoring. I have 16 controllers and each is running a different group. Question: Do I need a different radio profile for each group or can I just use one profile for all 16 groups?

     

     

    rf dot11a-radio-profile "spectrum-G1-sm"
    mode spectrum-mode
    exit

    rf dot11g-radio-profile "spectrum-G1-sm"
    mode spectrum-mode
    exit

    ap-group "G1-sm"
    dot11a-radio-profile "spectrum-G1-sm"
    dot11g-radio-profile "spectrum-G1-sm"
    end



  • 2.  RE: Spectrum monitor radio profile
    Best Answer

    EMPLOYEE
    Posted Mar 23, 2016 11:18 PM
    You can use the same one. Just remember if you change a setting, it changes everywhere the profile is used.

    Sent from Nine<>