Network Management

Reply
Contributor I
Posts: 88
Registered: ‎01-09-2014

Upload LOGO to Internal Captive Portal via Airwave?

Hi,

 

I have Airwave managing instant APs. I created a Guest WIFI using Internal Captive Portal authentication (internal guest account). However how can I upload our company logo to the Internal Captive Portal via Airwave?

 

I know I could do that when managing Instant AP directly.

 

Thanks,

/S

Guru Elite
Posts: 21,274
Registered: ‎03-29-2007

Re: Upload LOGO to Internal Captive Portal via Airwave?

[ Edited ]

.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 88
Registered: ‎01-09-2014

Re: Upload LOGO to Internal Captive Portal via Airwave?

oKEY, so how should I upload the logo image then?

Moderator
Posts: 1,270
Registered: ‎10-16-2008

Re: Upload LOGO to Internal Captive Portal via Airwave?

What AirWave version are you running?

 

DE20546 sounds pretty close to what you ran into.  This is fixed for 8.0.7 (when 8.0.7 is released).

 

The steps:

1) upload new logo into Device Setup -> Firmware & Files (there's an add new captive portal button at bottom of page)

2) set group to use new logo: from group -> select group -> basic -> aruba instant setting box -> captive portal logo

3) desired result is the captive portal logo gets uploaded.  this can be confirmed also in the igc logs or vc/ap logs in /var/log.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Contributor I
Posts: 88
Registered: ‎01-09-2014

Re: Upload LOGO to Internal Captive Portal via Airwave?

Awesome!!!

 

I will try from end-user perspective to see the result!!

 

Thanks,

/S

Search Airheads
Showing results for 
Search instead for 
Did you mean: