Network Management

Reply
Contributor I

User Client Alerts via email using Aruba Controller and Airwave

Hello

 

How can i set up email alert for a wireless client device when that device (Could be a Windows PC) goes down or comes back up or disconnects (as an example)

How is this done in a controller and Airwave management? 

 

Thanks

Mahathma

Guru Elite

Re: User Client Alerts via email using Aruba Controller and Airwave

Go to System> Triggers and add a "Connected Clients" trigger.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Contributor I

Re: User Client Alerts via email using Aruba Controller and Airwave

Thanks Colin, anything needs done in Controller? or once i set up this in Airwave and if a client device goes down a trigger is send via email?

Guru Elite

Re: User Client Alerts via email using Aruba Controller and Airwave

Nothing needs to be done on the controller.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor I

Re: User Client Alerts via email using Aruba Controller and Airwave

This seems to only work when Connecting.

Is there a way to alert for a disconnecting Client?

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: