Network Management

Reply
Occasional Contributor II
Posts: 137
Registered: ‎10-05-2015

User access - for specific Folder/Group - sees in VisualRF shows multiple Groups

Hi there, we provide access to our end customers. But we restrict every user just to their group/folder - refering to their own AP's only.

 

But when they go to VisualRF, they see multiple groups/campusses form our other customers.. 

 

We cheked all restrictions - but VisualRF MUST show only the cmapus with AP's from their group.folder. But it does not/

 

Do anyone have a solution?

Aruba Employee
Posts: 125
Registered: ‎04-24-2013

Re: User access - for specific Folder/Group - sees in VisualRF shows multiple Groups

Christiaan,

 

I don't think there is currently a way to do this. We map the folders(AP) to a user role and not the campus in specific. When you go to a floorplan of a user on Visualrf do you see the APs which are mapped to another users name in that ?

Regards,
Vishnu
If my post helped you, don't forget to give kudos ;)
Occasional Contributor II
Posts: 137
Registered: ‎10-05-2015

Re: User access - for specific Folder/Group - sees in VisualRF shows multiple Groups

Vishnu,

ogged in as a user - which only must have access to specific AP's in a folder - is for example seeing 5 campusses. AP's in thses campusses are not 'attched' to a user. 

Search Airheads
Showing results for 
Search instead for 
Did you mean: