Network Management

Reply
Regular Contributor II

VisualRF on tablets/touchscreens?

I'm curious if anybody is using VisualRF on a tablet or touchscreen device with any success?

 

I've tested on a few older Android tablets (4.1.2 and 5.0.1) and on a touchscreen PC running Windows 7 - neither will allow me to operate many functions within VisualRF.  

 

I can't  seem to double-click to open a site/building (although on Android this seems to work if I long press), and am not able to draw walls.  I can draw walls on the PC with the mouse, but not on the touchscreen.

 

I don't have access to any newer devices to see if maybe this is a limitation with Windows 7 on a touchscreen and might possibly work on Win8 or 10, or on newer versions of Android.

 

I spend quite a bit of time using VisualRF and using a mouse can cause some CTS problems.  

 

I imagine marking up floor plans might be easier if drawing on a tablet or touchscreen, or maybe I need to look into a pen input device for my PC?

 

Anybody out there have experience with any of this?

 

 

Guru Elite

Re: VisualRF on tablets/touchscreens?

I used to use VisualRF on my Surface Pro with the Surface pen all the time.
Was great for drawing walls, etc.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Moderator

Re: VisualRF on tablets/touchscreens?

Instead of drilling down by double-clicks, I tend to use the 'list' navigation to jump to a floor plan.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: