Network Management

Reply
New Contributor
Posts: 1
Registered: ‎09-09-2016

how are Aruba AP-225 access points mounted to the ceiling

I am project manager for replacing and installing new wireless access points and wireless controllers.

 

What I need to understand is how are the access point physicially installed to a ceiling (with a grid)?

Guru Elite
Posts: 20,559
Registered: ‎03-29-2007

Re: how are Aruba AP-225 access points mounted to the ceiling

[ Edited ]

What comes with the access point is two adapters for ceiling rails 9/16" or 5/16" EDIT:  15/16" in width that allows the AP to SNAP onto the rail.  You will probably have to cut a small  hole in the ceiling tile to accomodate the ethernet run:

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=13442

 

There is an optional kit, AP-220-MNT-C2, for "Silhouette" or "Interlude" ceiling tiles that can be purchased separately:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=11535

 

The buying guide here:  http://www.arubanetworks.com/assets/og/OG_AP-220.pdf details all of the mounting options and the documentation here:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/11533/Default.aspx has more details on those options.

 

 

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: