Network Management

Reply
New Contributor
Posts: 2
Registered: ‎02-13-2017

prtg setup

Attempting to setup in PRTG , 

tips or tricks appreciated. I saw in other forums that 1.3.6.1.4.1.14823.2.2.1.5.2.1.4 can be used to pull the names of access points. I an run that in paessler snmp tester, but pulls 90 lines of info , i only have 14 access points. 

 

not sure where to proceed from there. 

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: prtg setup

Use the PRTG MIB importer tool to import the Aruba private MIBs.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor
Posts: 2
Registered: ‎02-13-2017

Re: prtg setup

Thank You, I didn't even know that existing. 

I'm workign on registering as a customer, as per the Mibs document to download the current mibs found here: https://community.arubanetworks.com/aruba/attachments/aruba/unified-wired-wireless-access/7568/1/ArubaOS_5%200MG.pdf

 

Hopefully it all goes well. :)

Aruba Employee
Posts: 14
Registered: ‎03-17-2014

Re: prtg setup

You will find more updated MIB documentation o the support page:

 

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Default.aspx?EntryId=21094

 

As example for a ArubaOS Version 6.4.x

 

Cheers

Stefan

Search Airheads
Showing results for 
Search instead for 
Did you mean: