Network Management

Reply
Occasional Contributor II
Posts: 16
Registered: ‎11-29-2012

"mgmt-server"- command relating to AirWave.

Hello everybody,

I've got a question on "mgmt-server"-command relating to AirWave 7.7

We've master-locals environment with 6.3.1.2. Do we need to configure

mgmt-server type amp primary-server 10.11.12.13 profile AIRWAVE

on locals or only on the master?

 

I'm not able ro run "mgmt-server profile" command on locals:

(local1) (config) #mgmt-server profile AIRWAVE
                                        ^
% Invalid input detected at '^' marker.

Guru Elite
Posts: 21,029
Registered: ‎03-29-2007

Re: "mgmt-server"- command relating to AirWave.

The profile can only be configured on the master.  The "mgmt-server type amp primary-server 10.11.12.13 profile" command can be run on locals, as well.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 16
Registered: ‎11-29-2012

Re: "mgmt-server"- command relating to AirWave.

Thank you Colin,

 

it seems that I need to create profile on the master. It will be copied to locals.

And primary-server needed to be configured on all controllers as well, since the airwave server get informations (ex. Home/Firewall) from locals and not from master.

Search Airheads
Showing results for 
Search instead for 
Did you mean: