Network Management

Reply
Occasional Contributor II

upgrade from airwave 8.2.4 t 8.2.4.1

am i doing somthing daft? since the CLI has been removed a simple proccess now makes my life difficult. bring back CLI ...

 

anyway I used Bitvise to upload 8.2.4.1 firmware and i can see it uploaded without issue. when i press menu option 7 (upgrade) i press option 1 (update airwave) I am then asked for AMP version. I type 8.2.4.1 (assume it should then look for the local tar.gz file like it used to do)

 i then press enter and it kicks me back to the menu. pic attached

 

ps this is a Dell airwave

Aruba Employee

Re: upgrade from airwave 8.2.4 t 8.2.4.1

Hi ,

 

I dont see any screen shot attached, have you copied upgrade package to /root directory and tried running upgrade?

 

Regards,

Pavan

Occasional Contributor II

Re: upgrade from airwave 8.2.4 t 8.2.4.1

ScreenHunter_284 Aug. 10 09.06.jpg

I suspect the file is in the wrong location but not being a linux / scp user I assumed the upload option  was locked to a particular location(uploads to where the nightly backups go)

for scp would the command be  user@sourcip:filename.tar.gz /root

(not a linux guru)

Aruba Employee

Re: upgrade from airwave 8.2.4 t 8.2.4.1

Hi,

 

use below syntax

 

user@sourcip: /root/filename.tar.gz

 

Regards,

Pavan

Occasional Contributor II

Re: upgrade from airwave 8.2.4 t 8.2.4.1

wondering if its a windows issue

 

I am trying to pull the tar file from my remote windows pc (running bitvise) from the airwave console

 

 

scp your_username@remotehost.edu:foobar.txt    <uploads file but wrong location

 

scp your_username@remotehost.edu:foobar.txt /root  <child exited error 1 (access denied / direcory not found?)

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: