Remote Networking

Reply
Occasional Contributor I
Posts: 9
Registered: ‎09-02-2009

Allow 443 for VIA client

When configuring VIA on the controller; the ArubaOS 5.0 UG states:

Enable port 443—During the initializing phase, VIA uses HTTPS connections to perform trusted network and captive portal checks against the controller. It is mandatory that you enable port 443 on your network to allow VIA to perform these checks.

This is for the Internet facing interface? Will GUI admin access be possible? is there anything that should be known before enabling this?

Thanks...Randy
Guru Elite
Posts: 20,762
Registered: ‎03-29-2007

Re: Allow 443 for VIA client

443 is mandatory.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 4
Registered: ‎06-20-2011

Re: Allow 443 for VIA client

Isn't the default GUI access to controller done over TCP/4343 port and TCP/443 is used just for redirection. Right?

BR
Zoran
Aruba
Posts: 760
Registered: ‎05-31-2007

Re: Allow 443 for VIA client

WEBUI access is indeed on 4343. The VIA client wants to use 443 for SSL connectivity...
Search Airheads
Showing results for 
Search instead for 
Did you mean: