Remote Networking

Reply
New Contributor
Posts: 4
Registered: ‎07-03-2009

RAP with no link to controller and reboot

Hi

I use a rap on remote site (AP70) with a bridge SSID in PSK mode, i configure in my VAP an always mode
I make some test when I lost my wan link and it's OK when AP lost connection with controller.
But when I restart a RAP with wan link down, I can see my SSID with my laptop but I could'not connect to my wireless network.
Is it possible to connecte a new wireless client in this case?

regards,

Laurent
Guru Elite
Posts: 21,289
Registered: ‎03-29-2007

Connect to Bridged RAP

lcure,

Did the bridged SSID work? We have to make it work when the AP is up, first.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 4
Registered: ‎07-03-2009

Re: RAP with no link to controller and reboot

Hi Colin,

Yes the bridge SSID work when AP is connected to my controller and ssid work when AP lost connection with controller.
There is no wireless connection when an configured AP reboot without link to controller.

regards,

Laurent
Guru Elite
Posts: 21,289
Registered: ‎03-29-2007

Open a case

You should open a case, because that is supposed to work.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: