Reply
New Contributor
Posts: 2
Registered: ‎08-18-2010

Rap -2wg

Hi Guys.

I am new to Aruba.We recently purchased a RAP-2WG wireless Access point and Iam unable to configure it CAN anyone help me out as its critical...:o
Aruba Employee
Posts: 455
Registered: ‎04-02-2007

Re: Rap -2wg

Hi Patrick,

That's not a small request:) The user guide on the support site will have that information. You should also take a look at the VBN VRD available on the public site. That will give you the background information you need to get going: http://www.arubanetworks.com/pdf/technology/VBN_VRD.pdf

-awl
Andy Logan, ACDX
Director, Strategic Account Solutions
Aruba Networks
New Contributor
Posts: 2
Registered: ‎08-18-2010

Re: Rap -2wg

The user guide tells me to connect E0 to the modem and the other E1 to the pc.. U will be getting the ip ...all this is working for me also..But when i specify the Ip for the device ..I am getting an "Received error RC_ERROR_IKEP1. Trying (4/4)" and it restarts.
Aruba Employee
Posts: 455
Registered: ‎04-02-2007

Re: Rap -2wg

You need to tell us a lot more about what you're trying to do. Controller model number and software version would be helpful. Also, did you add the RAPs MAC address to the whitelist?

-awl
Andy Logan, ACDX
Director, Strategic Account Solutions
Aruba Networks
Search Airheads
Showing results for 
Search instead for 
Did you mean: