Security, WIDS/WIPS and Aruba ECS

Reply
Occasional Contributor I
Posts: 8
Registered: ‎04-28-2009

Blacklist users on bridged SSID

I'm having a little trouble with blacklisting a wireless client and I wanted to check if blacklisting works on bridged APs.

We have a bridged SSID available on a remote AP. I currently have an access control list applied to the user role for the virtual AP profile.

One of the rules in the ACL is that any traffic to our internal servers is dropped and the user/device should be blacklisted.

I can see a user device sending packets that breach the ACL rule. The packets are dropped, but the user isn't blacklisted.

The Aruba controller is running version 5.0.3.3.

Thanks

L
Guru Elite
Posts: 19,982
Registered: ‎03-29-2007

Re: Blacklist users on bridged SSID

That should work. We might have seen an issue recently where this does not work correctly. Please open a case with Aruba TAC so that your individual case so we can replicate your issue with your setup.
Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
Occasional Contributor I
Posts: 8
Registered: ‎04-28-2009

Re: Blacklist users on bridged SSID

Thanks Colin.

I've opened a case with TAC.

Regards

L
Search Airheads
Showing results for 
Search instead for 
Did you mean: