Security, WIDS/WIPS and Aruba ECS

Reply
Occasional Contributor II
Posts: 49
Registered: ‎06-22-2009

Cisco VPN client and Aruba controller

From my understanding, the Aruba controllers can be used to terminate "normal" IPsec clients too and not only RemoteAPs. If this is correct, is it also possible to connect with a PC based Cisco VPN client to the Aruba controllers? Any special configuration needed for that?

Thank you for your input in advance!

Stefan
Guru Elite
Posts: 19,972
Registered: ‎03-29-2007

Virtual Private Networks

The ArubaOS user guide has step by step instructions in the Virtual Private Networks chapter.
Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
Occasional Contributor II
Posts: 49
Registered: ‎06-22-2009

Re: Cisco VPN client and Aruba controller

Thank you Colin!
New Contributor
Posts: 1
Registered: ‎07-23-2011

Aruba controller cisco vpn client

Hi, how are you

i would like to know if you could connect your cisco vpn client to the aruba controller using ipsec. Im trying to do this, and i dont know if this is possible or not. What do i have to do ???

Thank you very much for your support
Aruba Employee
Posts: 99
Registered: ‎09-08-2010

Re: Cisco VPN client and Aruba controller


Hi, how are you

i would like to know if you could connect your cisco vpn client to the aruba controller using ipsec. Im trying to do this, and i dont know if this is possible or not. What do i have to do ???

Thank you very much for your support




Did you try the steps documented above?
Search Airheads
Showing results for 
Search instead for 
Did you mean: