Can one use 802.1x authentication via clearpass drilled down to the wired ports on a 93H access point?
We have the 93H set to following:
Wired AP: enable
Forward Mode: tunneled
Switchport Mode: access
Access mode vlan: 100 (example vlan)
The wirless side of the 93H works fine, but we need to lock down the wired ports. The goal is to use clearpass to take care of the authentication. We would like to distribute 93H's into our residence hall environments.
I have added a little diagram here that may help. Any advice on where on the controller we should configure this setting to point to clearpass for wired authentication would be helpful.
Thanks