Security

Reply
Occasional Contributor II
Posts: 61
Registered: ‎06-27-2016

CPPM Cluster Design if Publisher and Subscrib%0D%0Aer in different Locations

Hi The publisher and subscriber will be in different locations, and there is L2 link between the two sites. So can I use Eth0 as a cluster probe interface, and Eth1 for data and authentication? Or its better to use only Eth0 for all purposes?
Mahmoud
MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: CPPM Cluster Design if Publisher and Subscrib%0D%0Aer in different Locations

Please read the following Clearpass clustering guide
https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=15546
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 61
Registered: ‎06-27-2016

Re: CPPM Cluster Design if Publisher and Subscrib%0D%0Aer in different Locations

Nothing related to interfaces design in this document......

Mahmoud
Guru Elite
Posts: 8,633
Registered: ‎09-08-2010

Re: CPPM Cluster Design if Publisher and Subscrib er in different Locations

MVP
Posts: 399
Registered: ‎07-26-2011

Re: CPPM Cluster Design if Publisher and Subscrib er in different Locations

Hey, the configuration for each interface is detailed below.

 

Management Port : The Management port (ethernet 0) provides access for cluster administration and appliance maintenance using the WebUI, CLI, or internal cluster communication. This configuration is mandatory.

 

Data Port: The Data port (ethernet 1) provides a point of contact for RADIUS, TACACS+, Web authentication, and other dataplane requests. This configuration is optional. If this port is not configured, requests are redirected to the Management port.

ACMA, ACMP
If my post addresses your query, give kudos:)
Search Airheads
Showing results for 
Search instead for 
Did you mean: