Security

Reply
Occasional Contributor I
Posts: 5
Registered: ‎05-20-2014

CPPM radius authentication failed with controller 7010

Hi All,

 

Radius athentication failed between CPPM and Controller 7010. But same configuration applied to Controller 3400 and it works fine.

Attachment as below.

Regular Contributor II
Posts: 225
Registered: ‎10-29-2014

Re: CPPM radius authentication failed with controller 7010

[ Edited ]

For first pic: modify your service, the req is not hitting your Service. [could you post your service summary]

In 2nd pic its looking like you are testing your controller internal DB, make sure the user is in your internal DB.

Edit: If you want to test CPPM from there, select CPPM ip from drop down and make sure the user is in CPPM's local DB.

HTH
Cheers
SumaN
Guru Elite
Posts: 8,036
Registered: ‎09-08-2010

Re: CPPM radius authentication failed with controller 7010

The authentication check on the controller will never pass in ClearPass. If it fails, that's a good sign. If you get a timeout, you may want to check connectivity. 


Thanks, 
Tim

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Search Airheads
Showing results for 
Search instead for 
Did you mean: