During the browser request :
#show datapath session table 192.168.100.253
Datapath Session Table Entries
------------------------------
Flags: F - fast age, S - src NAT, N - dest NAT
D - deny, R - redirect, Y - no syn
H - high prio, P - set prio, T - set ToS
C - client, M - mirror, V - VOIP
Q - Real-Time Quality analysis
I - Deep inspect, U - Locally destined
E - Media Deep Inspect, G - media signal
u - User Index
Source IP Destination IP Prot SPort DPort Cntr Prio ToS Age Destination TAge UsrIdx UsrVer Flags
-------------- -------------- ---- ----- ----- ---- ---- --- --- ----------- ---- ------ ------ -----
Once I get the timeout message:
#show datapath session table 192.168.100.253
Datapath Session Table Entries
------------------------------
Flags: F - fast age, S - src NAT, N - dest NAT
D - deny, R - redirect, Y - no syn
H - high prio, P - set prio, T - set ToS
C - client, M - mirror, V - VOIP
Q - Real-Time Quality analysis
I - Deep inspect, U - Locally destined
E - Media Deep Inspect, G - media signal
u - User Index
Source IP Destination IP Prot SPort DPort Cntr Prio ToS Age Destination TAge UsrIdx UsrVer Flags
-------------- -------------- ---- ----- ----- ---- ---- --- --- ----------- ---- ------ ------ -----
192.168.100.253 10.156.4.53 17 64027 53 0/0 0 0 0 tunnel 36 4 10 4c FSCI
192.168.100.253 10.156.4.53 17 57448 53 0/0 0 0 0 tunnel 36 4 10 4c FSCI
192.168.100.253 10.156.4.53 17 59643 53 0/0 0 0 0 tunnel 36 4 10 4c FSCI
192.168.100.253 10.156.4.53 17 54485 53 0/0 0 0 0 tunnel 36 4 10 4c FSCI
192.168.100.253 10.156.4.53 17 52452 53 0/0 0 0 1 tunnel 36 c 10 4c FSCI
NB : before the device connect to the AP, it has the same output than up there.