Security

last person joined: 18 hours ago 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

Change CPPM Cluster IP Address

This thread has been viewed 0 times

  • 1.  Change CPPM Cluster IP Address

    Posted Mar 28, 2016 04:59 PM

    I have a CPPM cluster; VIP, Publisher and Subcriber.  I need to change the IP addresses to put this cluser into a new subnet.  Any guidance would be appreciated!



  • 2.  RE: Change CPPM Cluster IP Address

    Posted Mar 28, 2016 05:06 PM
    This is a Hardware or Virtual Appliance ?


  • 3.  RE: Change CPPM Cluster IP Address

    Posted Mar 28, 2016 05:26 PM

    Hardward appliances



  • 4.  RE: Change CPPM Cluster IP Address

    Posted Mar 28, 2016 05:36 PM
    The best way to do this is through the serial port using the cable that was provided and then use the following format through CLI :

    configure ip netmask gateway



    http://www.arubanetworks.com/techdocs/ClearPass/Aruba_DeployGd_HTML/Content/1%20About%20ClearPass/Hardware_Appliance.htm


  • 5.  RE: Change CPPM Cluster IP Address

    Posted Mar 30, 2016 09:52 PM

    I would suggest to delete the VIP, break the cluster and change the interface IP addresses separately. Then form a cluster and configure the new VIP. Changing Interface information when they are in cluster may lead to cluster sync issues.