Security

Reply
Occasional Contributor I
Posts: 7
Registered: ‎03-03-2015

Change CPPM Cluster IP Address

I have a CPPM cluster; VIP, Publisher and Subcriber.  I need to change the IP addresses to put this cluser into a new subnet.  Any guidance would be appreciated!

MVP
Posts: 4,308
Registered: ‎07-20-2011

Re: Change CPPM Cluster IP Address

This is a Hardware or Virtual Appliance ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 7
Registered: ‎03-03-2015

Re: Change CPPM Cluster IP Address

Hardward appliances

MVP
Posts: 4,308
Registered: ‎07-20-2011

Re: Change CPPM Cluster IP Address

The best way to do this is through the serial port using the cable that was provided and then use the following format through CLI :

configure ip netmask gateway



http://www.arubanetworks.com/techdocs/ClearPass/Aruba_DeployGd_HTML/Content/1%20About%20ClearPass/Hardware_Appliance.htm
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Aruba Employee
Posts: 18
Registered: ‎04-28-2009

Re: Change CPPM Cluster IP Address

I would suggest to delete the VIP, break the cluster and change the interface IP addresses separately. Then form a cluster and configure the new VIP. Changing Interface information when they are in cluster may lead to cluster sync issues. 

Search Airheads
Showing results for 
Search instead for 
Did you mean: