Security

Reply
Regular Contributor I

Change port to guest portal

Hello,

i have realized that a guest can connect to clearpass plicymanager page.
Can i change this port so i can make a different rule on firewall to block only this port  and the guest can connect only to captive protal.


Best regards
Andrea

Andrea
Guru Elite

Re: Change port to guest portal

Under Server configuration, click on a server and navigate to the network tab. Under application access control, you can restrict certain subnets from accessing different ClearPass applications.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Regular Contributor I

Re: Change port to guest portal

Hi,
thanks for your answer.
this is very helpful for me, but i have two server in cluster and i use the Virtual IP (VIP).
-----------------------------------------
192.168.123.y (Node a)
192.168.123.z (Node b)
192.168.123.x (VIP)
-----------------------------------------

So if trying to navigate to 192.168.123.x (the VIP) the restriction are still valid?

Thanks in advance
best regards

Andrea
Guru Elite

Re: Change port to guest portal

Yes. Please test and confirm.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Regular Contributor I

Re: Change port to guest portal

Hi, i will try.

 

But, can i use a http port for guest authentication?

if it yes where i can set it?

 

best regards

Andrea

Andrea
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: