Security

Reply
Contributor II
Posts: 40
Registered: ‎05-27-2014

Christie Brio and Airgroup

Hello there,

 

I was wondering if one of you successfully deployed a Christie Brio and a multi network scheme so it becomes discoverable through Airplay?

 

Please note that it is the wired version of Christie.. with the wireless one we have no issue.

Long story short :

wired christie to wired user device = works fine

wireless Christie to wireless user = works fine

wired christie to wireless= no working at all .

 

Thx.

Guru Elite
Posts: 8,180
Registered: ‎09-08-2010

Re: Christie Brio and Airgroup

You likely will need to either:

 

1) Redirect layer 2 advertisements to a tunnel to the controller(s)

2) Trunk the wired VLAN where the devices live to the controller(s)


Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Contributor II
Posts: 40
Registered: ‎05-27-2014

Re: Christie Brio and Airgroup

That works only when the Brio is on the same subnet. :(

Guru Elite
Posts: 8,180
Registered: ‎09-08-2010

Re: Christie Brio and Airgroup

Yes, which is why you need to trunk the wired Brio subnet to the controller so it can see that packets. (or redirect them to the controller via a GRE tunnel)

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Search Airheads
Showing results for 
Search instead for 
Did you mean: