02-16-2016 07:24 AM
I set Clearpass and Palo Alto for communication via API
( follow this instruction http://www.arubanetworks.com/assets/pso/TechNote_A
Now, On palo-alto, It can see only ip-address and username of authenticated clients and didn't see device name or device type. But on clearpass, I see all endpoint informations.
How i troubleshoot and solve this problem ?
02-16-2016 07:26 AM
Please be sure to use the TechNotes from the support site.
Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
02-16-2016 07:42 AM
Thank you for fast reply.
I set up follow step except page 19. I used clearpass 6.5 but when i want to set session check, there isn't ip-address-change-notify to select. Is it caused that palo didn't receive informations ?
02-17-2016 08:53 PM
Well I write the CPPM/PANW TechNote and in the latest published version, V5 [which was published in May 2015] it details on page 19 the required configuration. Here is a link to my TechNote. HTH.
Snr Tech Marketing Engineer - ClearPass
-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.