04-12-2012 06:27 AM
Im trying to configure the ClearPass as the radius server for the guest users database for web authentication. it works fine as radius server for dot1x, but for the guest users something fails.
when i check the log it gives this at alert:
Error Code: 216
Error Category: Authentication failure
Error Message: User authentication failed
Alerts for this Request
RADIUS Cannot select appropriate authentication method
which makes some sense i guess because this isn't EAP TLS or such, but still it should be possible right? is there anything i need to configure on the aruba controller?
Solved! Go to Solution.
04-12-2012 07:48 AM
Under Authentication TAB, allow PAP.
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
04-12-2012 10:29 AM
04-13-2012 02:43 AM
thanks cjoseph, that worked.
first there was another alert about something with user bindings (tdc-01 - tdc-01.test.loc: Bind as user failed), but after double checking everything it didn't occur anymore and now it works fine.