Security

Reply
Occasional Contributor I

ClearPass enable guest access without needing to log in

How do you configure ClearPass so when a user logs on to the Guest SSID, all they have to do is tick 'I accept the terms and conditions' and then logs them in? And how can I ensure that when the user taps the Guest SSID, it gets directed to this page that tells them they must accept conditions, will it be an enforcement profile?

Guru Elite

Re: ClearPass enable guest access without needing to log in

Re: ClearPass enable guest access without needing to log in

Under the Guest Module > Configuration > Pages > Web Logins > Create a Web Login :

- Authentication : Anonymous login

- Select to Auto-generate Anonymous account

- Pre-check : Local account

- Select requires terms and conditions

- Save
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I

Re: ClearPass enable guest access without needing to log in

Thank you so far I have now got the page looking the way i need it to look. 

 

1. How do i make sure the Guest SSID which is broadcasted from the access point will make sure users are directed to this page i just made?

 

2. Regardless of what addresss i put in to the *address field, when i accept the tc and cs after i log in i get directed to the url i put in the *address field and then it adds /cgi-bin/login onto the end of the address. But then theres another field further down in the Web Login Page section, which is called *Default URL - but I don't get directed there at all after accepting conditions when i have logged in? 

 

 

 

 

Re: ClearPass enable guest access without needing to log in

Can you please share a screenshot of the issue you are seeing on the page ?

Are you using an Aruba controller / Instant Cluster or another wireless vendor ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I

Re: ClearPass enable guest access without needing to log in

Using Aruba access points. 

 

These are the fields i was talking about. The first snip shows the *address field. What ever address put in here is the redirected page the user gets when they log in. 

 

The second snip regardless of what put in here it doesnt redirect you to this site

 

The 3rd snip shows the URL returned after login. 

default address - Copy.JPG

How do i make sure that when the user taps on Guest SSID, they get redirected to the Web Login Page i made?

 

Guru Elite

Re: ClearPass enable guest access without needing to log in

You need to enter the common name of your captive portal certificate in that field.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: