Security

Reply
Frequent Contributor I

Clearpass - Discovered Devices to Network Devices

I would like to make all of my network switches, network devices in Clearpass.

 

Is there a way to make a discovered device a network device or will I need to manually add them?

Contributor I

Re: Clearpass - Discovered Devices to Network Devices

With discoverd device you mean endpoint?

 

What you can do is export 1 device (not endpoint), add every switch in the xml, and re-import the complete xml with all switches.

 

Other option is to add a device with a subnet, this way you have 1 entry for a complete /24 management subnet, you must use the same radius/tacacs keys, and you cannot filter on source device or specific attributes for a device (only nas-ip).

----------------------------------------------------------------------------------------
Aruba ACCX #748, ACDX #758, ACMP, ACEAP | HPE Master ASE
Frequent Contributor I

Re: Clearpass - Discovered Devices to Network Devices

At one point I ran the Network Scan, under Profile and Network Scan.

 

It discovered most of my switches and they are now listed under Discovered Devices, under the Profile and Network Scan.

 

I thought about doing an export/import from the Network/Devices page, but I have yet to find a decent XML editor that will work. I could do it manually using Notepad, but that's a pain.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: