04-03-2014 03:52 PM
I am trying to tie in a TrippLite SNMPWEB card with ClearPass RADIUS authentication.
I've imported the dictionary in ClearPass, and have been able to log into my device. My problem is that ClearPass is not repsonding with the TrippLite attributes that will give read/write access to the device.
Any thoughts about how this was implemented?
Here's the implementation:
ClearPass Policy Manager v22.214.171.124621
TrippLite SNMPWEBCard Firmware v12.06.0061
TrippLite Dictionary requirements in Free Radius format
TrippLite Dictionary redefined in ClearPass XML
TrippLite Dictonary Imported
ClearPass Enforcement Policy
Access Tracker Results w/ Radius Response (no TrippLite-Authorization).
Errors in the access tracker log:
2014-04-03 16:40:53,622 [RequestHandler-1-0x7f864cbe5700 h=642781 c=R0000000c-01-533de375] ERROR Common.RadiusDictTable - No Dictonary for VendorId = 850
2014-04-03 16:40:53,622 [RequestHandler-1-0x7f864cbe5700 h=642781 c=R0000000c-01-533de375] ERROR Common.RadiusVendorAttrMap - Invalid attribute Id=1 Vendor=TrippLite
2014-04-03 16:40:53,622 [RequestHandler-1-0x7f864cbe5700 h=642781 c=R0000000c-01-533de375] ERROR Common.BaseRadiusEnfProfileCacheObj - Failed to insert Vendor=TrippLite attrId=1 Value="default=rw"
Thanks in advance for any guidance/feedback,
Solved! Go to Solution.
04-04-2014 07:05 AM - edited 04-04-2014 07:06 AM
Did you restart your clearpass (i believe the radius server service is enough) after editing/adding your custom radius dictionary?
Messing with the dictionaries requires a restart if I remember correctly.
-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.