Security

Reply
Occasional Contributor I
Posts: 9
Registered: ‎01-26-2016

Clearpass blacklisted users

Hi,

I applying an enforcement profiles that blacklist any user when daily bandwidth limit is exceeded.

The Clearpass is configure to purge all blacklisted users at midnight

Everything working fine

 

How do I exclude the implementation of this enforcement profile on a specific users and keep it applied on all other users?

 

Best Regards

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: Clearpass blacklisted users

What type of authentication are you using ?

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 9
Registered: ‎01-26-2016

Re: Clearpass blacklisted users

AD  &  MAC

 

Best Regards

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: Clearpass blacklisted users

If is based on a certain type of user can you can leverage AD memberships to determine who or not will be blacklisted


Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 9
Registered: ‎01-26-2016

Re: Clearpass blacklisted users

Dear Victor

You mean that we can created an enforcement Policies for a specific AD-Group members ?

Best Regards

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: Clearpass blacklisted users

Yes

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 9
Registered: ‎01-26-2016

Re: Clearpass blacklisted users

Dear Victor

thanyou ...its working

 

but how can manually synchronize Active Directory users with the Clear-Path

 

Best Regards

Guru Elite
Posts: 8,638
Registered: ‎09-08-2010

Re: Clearpass blacklisted users

What are you trying to synchronize? Please clarify.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I
Posts: 9
Registered: ‎01-26-2016

Re: Clearpass blacklisted users

Dears

 

I create AD Group ( wireless_No_blacklist )  and i create an enforcement condition to give allow access to ( Wireless_No_blacklist ) members

check out the attached Pic.

 

the problem is: when i assign a new AD user to (Wireless_No_blacklist ) it takes many hours to appear on clears Pass so is there any way to sync the new users manually

 

Best Regards

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: Clearpass blacklisted users

You can either do a clear cache manually under sources > your ad
Or decrease the cache value

Noté: be careful decreasing the value because that means that clearpass will contact the AD more often

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: