Security

Reply
New Contributor
Posts: 3
Registered: ‎09-12-2013

Clearpass terniate wireless after cert installed issue

Hi All,

 

I have a questions on clearpass for you.

 

I am doing configuration for onboarding now, and my device can successfully onboard to the network, just one more step further, i would like to know if there's any way to disconnect wireless for client after certifacate has been installed successfully? This will not require user manually to disconnect and connect back to network again.

 

I tried set the cisco termination session, but looks like it doesn't work.

 

Shawn

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Clearpass terniate wireless after cert installed issue

You shouldn't need to do anything special in the enforcement profiles...this is handled by the OnBoard configuration.  There is a setting under Network to automatically reconnect the client.  Once Onboarded, the client will issue the reconnect.  

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Aruba
Posts: 1,540
Registered: ‎06-12-2012

Re: Clearpass terniate wireless after cert installed issue

But you must enable COA on network device

 

nasdevice.png

Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Clearpass terniate wireless after cert installed issue

Correct...I thought that was already done.  Probably a poor assumption on my part!

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
Showing results for 
Search instead for 
Did you mean: