Security

Reply
Contributor I
Posts: 40
Registered: ‎02-12-2011

DIRECT ACCESS TO PRIVILEGE MODE IN TELNET

Hello.

 

I am tying to configure a Radius server to authenticate user. I got it with wireless clients, but I cannot get what I want regarding access through telnet. When loggin with a user included in the Radius server I get access to the controller, but not in privilege mode, so I must know the enable password. I do need know such a password when I access the controller throught web. Is there any way to access directly to the privilege mode through telnet?

 

Thanks.

 

 

Alejandro

Guru Elite
Posts: 21,010
Registered: ‎03-29-2007

Re: DIRECT ACCESS TO PRIVILEGE MODE IN TELNET

config t

enable bypass



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 40
Registered: ‎02-12-2011

Re: DIRECT ACCESS TO PRIVILEGE MODE IN TELNET

Hello.

 

Thanks for your interest.

 

My controller (A200) has firmware version 5.0.4.9, and does not support such a command. Any other way?

 

Regards.

 

 

Alejandro

Guru Elite
Posts: 21,010
Registered: ‎03-29-2007

Re: DIRECT ACCESS TO PRIVILEGE MODE IN TELNET

Sorry, I did not know you were using 5.x.  That command does not exist in 5.x and there is no other way, unfortunately.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 40
Registered: ‎02-12-2011

Re: DIRECT ACCESS TO PRIVILEGE MODE IN TELNET

Thanks for your reply.

 

Regards.

 

 

Alejandro

Search Airheads
Showing results for 
Search instead for 
Did you mean: