Security

Reply
MVP

Dell Switches with CPPM

Hi Everyone, I have a question.

 

I'm testing Dot1X wired policy with clearpass and I don't see the Dell in the "Vendor Name" field when adding the network switch , any recomendations on what vendor to choose? I would like to test some RADIUS actions, like VLAN assigment base on authentication results(if not authenticated assign Guest VLAN),  Radius CoA, etc, thanks a lot in advanced.dell.JPG

Oscar,
“All opinions written here are my own and do not necessarily reflect the views and opinions of Aruba.”
“If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos"

Guru Elite

Re: Dell Switches with CPPM

Which variant of Dell switches?

Tim Cappalli | Aruba Security
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
MVP

Re: Dell Switches with CPPM

DELL Nxxx series, I'm testing with a N2048p  version 6.3.xx

Oscar,
“All opinions written here are my own and do not necessarily reflect the views and opinions of Aruba.”
“If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos"

Guru Elite

Re: Dell Switches with CPPM

AFAIK, they do not use any vendor specific attributes. You can likely just
use IETF as the vendor.

Tim Cappalli | Aruba Security
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
MVP

Re: Dell Switches with CPPM

Thanks, I will go ahead and choose IETF.

Oscar,
“All opinions written here are my own and do not necessarily reflect the views and opinions of Aruba.”
“If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos"

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: