Security

Reply
Occasional Contributor II

Failed to add static route to CPPM

Hi all,

 

I have set up CPPM to only use the mgmt port, and forward all traffic to the default gateway by default. Due to some reasons, I now need to forward traffic to a specific server via a different gateway. But no matter how I tried, it's always failed. Below is my current config and the commands I have tried with no success:

 

1.PNG

 

2.png

 

3.PNG

 

4.PNG

 

Please take a look and have some advice on what I did wrong.

 

Thank you,

Re: Failed to add static route to CPPM

Hey, my first concern is that the device is  unable to find eth1? What kind of appliance is this? Is this a VM and has eth1 been attached to the underlying VM, only reason I am asking as I can't see if there is a MAC address assigned to eth1.


ACMA, ACMP
If my post addresses your query, give kudos:)
Occasional Contributor II

Re: Failed to add static route to CPPM

Thank you so much. That solved my problem :). Yes, my CPPM is an VM and after I connect another virtual network adapter to it, I can now add static route without any problems.

 

Thanks again for your help.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: