Occasional Contributor I

Forcing the re-authentication on HP CPPM 6.7


I have now created a 802.1x authentication service that works great, but while the host disconnects from the switch and connects to another ip (manual IP address setting) in the enpoint information I have the previous ip.

Is there a manual forcing reauthentication?

I will add that the switch does not support CoA (HP 1920 series). The re-categorization is done after about 23-25min, after that time a new ip appears in the endpoint information/or insight.

Search Airheads
Showing results for 
Search instead for 
Did you mean: