Hi,
This problem isn't caused by the wireless but I was hoping someone here might have an idea of what to check.
I have a laptop that is joined to AD and when it does machine authentication it is sending "host/COMPUTERNAME" not "host/COMPUTERNAME.domainname.com"
I looked around and as far as I can tell this is governed by a few registry keys under HKLM\SYSTEM\CurrentControlSet\services\Tcpip\Parameters
The keys are "NV Domain" and "Domain". These should be populated with the domain name.
In the case of the laptop these keys are properly populate.
When I check System > Computer name, domain...> Change settings > Computer Name tab
the "Full computer name:" shows only the computer name. Not the computer name + domain.
I have tried disjoining and rejoining the device. I have tried blanking the registery keys above, rebooting, and repopulating them. I have had no luck in getting the machine to it's full name.
Just curious if anyone has run into this and if there is anyway to "reset" the pc so that it appends the name properly. I have another idea for fixing this issue in the CPPM by just pulling the CN. But I want to try and fix the naming issue.
Anyone have any ideas on this one?
Thank you